|
STANDARD FEATURES OF THE DP3 SERIES
- 3 Roll Double Initial Pinch allows prebending and rolling WITHOUT REMOVAL OF PLATE
- Hydraulic Adjustment of Lower Rolls inside DUAL LINEAR SLIDES
- All Rolls driven by INDEPENDANT HYDRAULIC MOTORS AND GEARBOXES
- HYDRAULIC BALANCING
- NORMALIZED, HARDENED & STRESS RELIEVED Roll Forgings
- MCS BEARING SYSTEM: Four Bearings per roll offer unequalled support, even during offset (cone rolling) operation
- DIGITAL READOUTS assist in accurate repetition of rolling process
- HYDRAULIC DROP END for removal of finished ferrule
- HYDRAULIC PROTECTION against overloads
- ISO 9000 certified components
- Safety Cable around machine (with micro switch for immediate motion
stop)
- CENTRAL OPERATOR CONSOLE (on swinging control arm) with all controls and readouts
- Cone Bending Attachment
- EXTENDED SHAFTS for section bending tooling
TECHNICAL DATA
| Max Plate Length |
10’-0” |
Distance Between Housings
|
10’-2” |
| Top Roll Diameter |
11.22” |
Lower Roll Diameters
|
10.43” |
| Driven Rolls (Hydraulic Motors) |
3 |
| Rotation Speed |
16 Ft/Min |
Motor
|
20 HP |
| Controls |
Hydraulic |
Balancing
|
Hydraulic |
| Machine Size (LxWxH) |
217 x 48 x 67” |
Guaranteed Machine Weight
|
17,600 Lb |
| FULL LENGTH BENDING CAPACITIES (based on Yield Point of 36,000 psi) |
| Rolling Only |
0.591” 56 1/4” ID |
With Pre-Bending
|
0.472” 56 1/4” ID |
| Rolling Only |
0.443” 14 3/4” ID |
With Pre-Bending
|
0.354” 14 3/4” ID |
| FULL LENGTH BENDING CAPACITIES (based on Yield Point of 52,000 psi) |
| Rolling Only |
0.508” 56 1/4” ID |
With Pre-Bending
|
0.406” 56 1/4” ID |
| Rolling Only |
0.381” 14 3/4” ID |
With Pre-Bending
|
0.305” 14 3/4” ID |
| HALF LENGTH BENDING CAPACITIES (based on Yield Point of 36,000 psi) |
| Rolling Only |
0.635” 56 1/4” ID |
With Pre-Bending
|
0.508” 56 1/4” ID |
$50,000.00 Includes Polished Rolls.
For more information contact:
All Fabrication Machinery Ltd.
3809 - 34 Avenue
Leduc Alberta, Canada
T9E 6E4
780.980.9661 Phone
780.980.9668 Fax
403.710.5063 Calgary Office
E-mail us!
info@allfabmachinery.com
|
